Glory Hole Guide - Locations - Stories

Glory Hole Guide - Locations - Stories (http://www.gloryholeguide.com/forums/index.php)
-   General Discussion (http://www.gloryholeguide.com/forums/forumdisplay.php?f=4)
-   -   A gloryhole is NOT A FUCKING SHEET with a hole in it! (http://www.gloryholeguide.com/forums/showthread.php?t=6344)

middy99 07-23-2018 05:06 AM

A gloryhole is NOT A FUCKING SHEET with a hole in it!
 
I just wanted to get that strong personal feeling of mine out there once again. If you need lightweight GH portability, try using a big piece of cardboard or foam for your home GH setups. At least TRY to do something other than a lazy assed sheet strung up over an opening with a hole cut in it. Guys getting sucked need to sense and feel a physical separation between cocksucker and cocksuckee. That's a HUGE PART in making the scene hot. Nothing worse, more boring and disappointing than to be watching videos of home GH setups where the cocksucker is touching, leaning all over the guy getting sucked. Hands off everything except cock and balls please. A big point in GH sex is just dick and balls contact only. If you can't be bothered with a real wall, then you might as well take the fucking sheet or blanket or tarp down and just wear a mask and suck cock instead if you feel you still need the anonymity at this point!

bjbud4u 07-26-2018 11:00 AM

1 Attachment(s)
I totally get your point and tend to agree on most of it. But - fortunately there is enough diversity in the gh community where a g-holer with a sheet can attract enough clientele to make him happy. Then there are guys like us who honor the gh experience just as you say . . a relationship with an anon cock-n-balls . . . ONLY. I get such a rush at the site of a big beautiful cock and all natural balls just "hangin there on the wall" in front of me. . . and in gh suck vids too.

middy99 07-26-2018 04:16 PM

Nice...
 
Definitely would be helping to service that one!

ExploreLA 08-28-2018 11:38 PM

I don't disagree, but I don't fully agree either. When you need something compact and discreet, sometimes a curtain is your only choice, but it should be a thick curtain, not a see-thru sheet. But, there's no one-size-fits-all either. I wish I could construct something. I know how, but have nowhere to stash it. Personally, I never leave my side. They get my mouth, and I'd prefer the protection, and separation of a board. But I've been surprised that guys have wanted to reach around, and grab the back of my head, or have asked me to touch their legs, or ass.

It's the same as there not being the perfect way to give head. I was deepthroating someone, and he told me to stop, and keep my mouth on the head, and stroke the shaft. I've also heard, "DON'T grab my dick! It's a BLOWjob, not a handjob." Whenever I see a list of what to do to give the perfect head, I get furious, because at some point, I've been told the opposite of everything in the list.

"Take it deep!" / "Focus on the head!"
"LOOK at me!" / "Quit staring up. It's creepy"
"Don't forget the balls." / "Just don't! They're too sensitive."

Sheet with touch / board with separation -- is just a variation on this. No one's "perfect" situation is the same.

bjbud4u 08-30-2018 04:18 PM

Quote:

Originally Posted by ExploreLA (Post 19026)
I get furious, because at some point, I've been told the opposite of everything in the list.

"Take it deep!" / "Focus on the head!"
"LOOK at me!" / "Quit staring up. It's creepy"
"Don't forget the balls." / "Just don't! They're too sensitive."

Sheet with touch / board with separation -- is just a variation on this. No one's "perfect" situation is the same.

Sorta funny . . . and SO TRUE. But, ya know . . . I think we'd be extremely bored if everyone was the same. That's why it's so important to tune in the best you can when you are servicing a dick. . . to try to the best you can for a SUCKcessful bj.

mcluvin78 08-30-2018 09:47 PM

I wouldn't like a sheet either .I just want total privacy with a hole just big enough for my cock and balls to fit thru . I don't want any other kind of interaction other than getting my nut worked out .I don't want to see anyone or talk to anyone or touch anyone, just work my load out while I watch some porn and then we go out separate ways.

ExploreLA 08-31-2018 11:21 AM

Quote:

Originally Posted by bjbud4u (Post 19033)
Sorta funny . . . and SO TRUE. But, ya know . . . I think we'd be extremely bored if everyone was the same. That's why it's so important to tune in the best you can when you are servicing a dick. . . to try to the best you can for a SUCKcessful bj.

That's always been my point too. Start however you're gonna start, but from then on, it's paying attention to what they like, listening to what they say, and not being offended by their suggestions. I'm down there to get them off, and that's only gonna happen if I do what they like.

Has anyone who has built a wooden hole, found a clever way to make the height adjustable, other than cutting a long slot? If I build one, like @mcluvin78 said, I only want the hole big enough for their cock and balls, and a long slot is too much exposure for me.

mcluvin78 08-31-2018 09:04 PM

I'm not a carpenter , but I'm thinking some kind of vertical sliding panel with a hole in it .it would need to be able to be securely locked in place at the needed height ,don't want it trying to fall with someone's dick caught in it.

bjbud4u 09-01-2018 11:19 PM

Quote:

Originally Posted by mcluvin78 (Post 19042)
.it would need to be able to be securely locked in place at the needed height ,don't want it trying to fall with someone's dick caught in it.

Yeah - I'm getting a pretty nasty visual of that dick guillotine. . . . . Yikes!

bjbud4u 09-01-2018 11:22 PM

Quote:

Originally Posted by ExploreLA (Post 19038)
, I only want the hole big enough for their cock and balls, and a long slot is too much exposure for me.

If you make the long slot narrow - like 3" max - you still have your discretion / nearly anon


All times are GMT -5. The time now is 10:09 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.