Glory Hole Guide - Locations - Stories

Go Back   Glory Hole Guide - Locations - Stories > Glory Hole Guide > General Discussion

General Discussion Discuss Glory Hole encounters, fantasies and stories.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-23-2010, 10:09 PM
leprechaunthe leprechaunthe is offline
Junior Member
 
Join Date: Sep 2010
Location: AZ
Posts: 6
Arrow MY first gloryhole

I have watched videos or read stories for years but I never knew they exsited till one day I saw an arcade at my favorite ABS so I walked in and found one. I was excited but I had to be up for work the next day so I decided I would go on friday. when I got home friday I jumped in the shower then headed out. i went to the ABS and asked the cleark for a five and five singles. when I was handed the money my heart was pounding and i turned to the arcade. I first went into a single booth with no holes and tried to get comfortible but there was a guy that kept knocking on my door he left and I started to relax. after the video stopped I walked into the hall with three booths connected and I went to the one all the way to the right. as soon as I walked in I heard the door next to me close. I put in my five dollar bill and pulled out my cock and started to play with it. then I saw a finger in the hole so I turned and put my dick threw but when I did he left. I thought it was a fluke so I pulled back into my booth and started flipping channels till I saw a light threw the hole and heard money. I then saw a black fing come threw the hole and a voice say that he wanted to suck my cock so I turned and stuck my cock threw the hole and was welcomed by his warm mouth. he was really good at it and i was about to cum but I thought I should see if he wanted to be touched to so I pulled out and put my finger to the hole. I heard him stand up and it went quite so I thought he left till I heard his zipper then he slid his BBC threw the hole really slow (it had to be atleast 9" long and really thick) I knew I couldnt suck it so I drooled on it getting it nice and slippery it to both of my hands to rap around it but as soon as i did i started to jerk him off as hard as I could. then he pulled back in and came on the wall then put his finger back to the hole just as I was about to push back in his door opened and he got kicked out. So I figured I would just finish in my booth and left. (LOOKING FORWORD TO MY NEXT TIME THOUGH)

this is a true story of my first time at a glory hole ill be sure to tell you about my next
Reply With Quote
  #2  
Old 03-25-2011, 06:05 PM
dckrubber dckrubber is offline
Junior Member
 
Join Date: Jan 2011
Posts: 2
Default

very hot story!
Reply With Quote
  #3  
Old 07-26-2012, 10:05 PM
Sewanee Sewanee is offline
Member
 
Join Date: Jul 2012
Location: FL
Posts: 44
Default

Very hot story!
Reply With Quote
  #4  
Old 10-04-2021, 10:55 AM
FrankJScott FrankJScott is offline
Senior Member
 
Join Date: Jul 2021
Location: USA
Posts: 715
Send a message via ICQ to FrankJScott Send a message via AIM to FrankJScott Send a message via Yahoo to FrankJScott Send a message via Skype™ to FrankJScott
Default Excellent Best Pph Software Advice

In response to the people inquiring about how much does live casino pay, being a bookie, how does a sports bookie work, how much does casino heist pay gta, I highly suggest this top rated pay per head tips on top of pay per head casino, ace review center baguio, real bookies fixed matches, best pay per head reviews, look at this excellent best pph software blog not to mention how much do casino employees make, best pph sportsbook, live casino canada reviews, become a bookie, try this awesome realbookies site for play live casino reviews, best pay per head casino, best pay per head bookmaker, best phone under 10000 in nepal, Also don't forget this top rated best bookies software blog not to mention ace per head review, how much do casinos pay for slot machines, be a bookie spreadsheet, best pay per head site, look at this new ace per head advice for is pph a good share to buy, what is head to head betting, phh mortgage reviews bbb, and don't forget this recommended bookie software review site as well as how much can you make as a bookie, sportsbook agent service, book making software for pc, pph bookie software, look at this new top pay per head site on top of how much do head shops make, what are some disadvantages of credit cards, best pay per head bookie software, what is a head teachers salary, try this recommended pay per head sportsbook software advice for best phone under 20000 in pakistan, betting software developers in india, best photo printer, realbookie app, Also don't forget this new business strategy 101 site alongside all best phone under 10000 5g, best pay per head casino, sportsbook per head, arbitrage betting software free, look at this new pay per head casino blog for what is a disadvantage of using a credit card, how much do casinos pay bands, best photo book making app for mac, See More Baru Situs Slot Terpercaya Blog c476ee4
Reply With Quote
  #5  
Old 10-13-2021, 10:46 AM
FrankJScott FrankJScott is offline
Senior Member
 
Join Date: Jul 2021
Location: USA
Posts: 715
Send a message via ICQ to FrankJScott Send a message via AIM to FrankJScott Send a message via Yahoo to FrankJScott Send a message via Skype™ to FrankJScott
Default ISO Standardization Is An Important Element In Your Business's Growth

Part 2-11 Of The Medical Electrical Equipment Section Essential Requirements For Safety And Effectiveness Of Equipment Used For Gamma Therapy En 60601-2-11:2015
Sometimes, medical equipment is employed for treatment, however, it could also be it can cause some harmful effects following. It is mandatory to use equipment in such situations to decrease the possibility of negative effects. EN 60601-2-11.2015 is a reference to the situation. The document outlines the safety and essential performance requirements for gamma beam treatment equipment, which includes multi-source stereotactic radiation therapy equipment. This specific standard, which is part of the 60601 Series, sets out the specifications that must be met by the manufacturers when they design and constructing gamma-beam therapy equipment. To ensure that there are no hazardous situations, the standard defines tolerance limits for interlocks that must be used to prevent the interruption or end of radiation. Each rule specifies the type of tests that are done by the company and the site tests. If you are a manufacturer who has a company that is connected with gamma beam therapy equipment, be familiar with our guidelines by following this hyperlink to the Item website. Check out the top iec catalog tc tc-23 information.

Innovation Management Methods, Tools And Guidelines For Partnership Innovation - Guidance (Iso 56003 :2019). En Iso 56003:2021
The key to creating new products is the creation of the ideal partner. This partnership allows the exchange of technological, advisory, financial, and support for resources, with other important aspects that will help create an efficient and sustainable system. One of the international standards that provide suggestions for the creation of the most effective partnership is EN ISO 56003: 2021.This document offers a guideline to help in the development of innovative partnerships. It offers guidelines for collaborations in the field of innovation.Take a decision on whether or not you would like to participate in an collaboration in innovation.You can identify, assess, and then select your partners.Make sure that all partners share the same perceptions about the worth of the project and the obstacles they will face.-- manage the partner interactions.The guidelines in this document are applicable to any type of collaboration or partnership, and is designed to be used by any organization regardless of size, type, product or service or type.(a) Start-ups collaborate with larger companiesb) SME or larger organisations;c. Private sector businesses that have public or academic entitiesd. Academic, public or non-profit organizations.The first step to form an alliance to develop new ideas is to study the areas of need. Next, identify and engage potential partners. Finally, govern the interactions of these partners.This model is appropriate for startups with no experience as well as large corporations. The issue of partnership is an important one. It is often responsible for future growth and profitability. If you're seeking long-term success, we strongly recommend that this document be reviewed. Have a look at the recommended iso catalog standards iso-16536-2019 information.

Characterization Of Bulk Materials Determination Of A Size Weighted Fine Percentage Or Crystalline Silica Content - Part 1: General Information, And The Selection Of Test Methods EN 17289-1:2020
The variety of materials used in production significantly makes it difficult to regulate both locally as well as globally. To ease the entry of companies and organizations into new markets international standards are being created, one of which is EN 17289-1:2020.This document details the requirements for the calculation of the size-weighted fine fraction (SWFF) as well as the size weighted fine fragment crystalline silicas (SWFFCS).This document provides guidelines for the preparation of the sample and for the determination of crystallized silicona with Xray Diffractometry XRD (XRD) as well as Fourier Transform Infrared Spectroscopy FT-IR (FT-IR).EN 1789-2 provides a procedure to calculate the size-weighted small fraction by measuring the size distribution of the particles. It assumes that the size distribution of the silicon crystals is the same as that of the bulk material. EN 1789-3 outlines a method employing a method of liquid sedimentation to determine the size-weighted fine percentage of crystallized silica. The two methods are based on a number of limitations and assumptions, which are outlined in EN 17289-2 and EN 1789-3, respectively. The method in EN 17289-3 may be applied to other constituents other than CS when it is investigated and verified.This document may be used to evaluate bulk crystalline silica materials, provided that it has been thoroughly studied and verified for the assessment of size-weighted, fine particles and crystal silica.If your business comes into contact with the material specified in this document's description, its inclusion in the documentation base for technology of your company will assist in expanding production. Follow the link to our website for more information. Have a look at the recommended iec catalog standards iec-tr-61305-6-2005 info.

Safety Of Machine Tools Part 4: Presses: Safety Requirements To Pneumatic Presses (Iso 160922-4.2019) EN ISO 16092-4:2020
Safety is a crucial aspect in establishing the regulatory framework that is applicable to a production or an company. This is the reason why there are many international standards that affect the subject. One of them is EN ISO 160922-4: 2020.This document, in addition to ISO 16092-1, defines the requirements for safety in the workplace and procedures to be implemented by those who production, design and distribution of pneumatic presses that are designed to process in cold metal, or materials that are made up composed of cold metal.This document will cover all hazards associated with pneumatic presses. They are designed to be used in conditions that can be reasonably anticipated by their manufacturer. Every phase of the machine's lifespan as specified in ISO 12100, 2010, 5.4 were examined.If you are looking to purchase this document it is possible to clarify all the detailed technical specifications by clicking on the link on our website or contacting the team that will help in identifying all the information that you're interested in. Check out the top iec catalog standards iec-62228-3-2019 review.

Health Informatics: Standard Communication Protocol For Electrocardiogram Using Computers. EN 1064:2020
Despite the fact that literally 10 years ago when technology was being introduced into the field of medicine was quite slow, in recent years, in the field of the fact that more and more attention is paid to human health, new developments and their advancement are being centered precisely in the medical sector. Information security is an important aspect of this field and is accountable for human safety. This is the reason why EN 1064:2020 is an international standard.This document describes the most common standards for cart-to-host and carttocart interchange of specific patient information (demographics recordings, ECG Signal data, ECG measurements, ECG interpretations results, etc. This document specifies how the data is interacted with digital ECG cards and computers ECG management software, as well any other computer systems that contain ECG data.The implementation of this standard will give a significant impetus to the development of your business in the market of today, which is the reason why we suggest that you familiarize yourself with its specifics by clicking on the link on our website. See the best sist catalog standards sist-ts-cen-ts-16555-4-2015 info.

__________________
top fixing your snoring problems gadget here.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:47 AM.


Other Glory Hole Sites:

Glory Hole Girlz (Over 200 Girls Sucking Off Complete Strangers!)
Glory Hole Boy (Guys Sucking Off Multiple Strangers!)
Theater Sluts (Dirty D turns out Sluts in Dark Porn Theaters!)
Glory Hole DVDs


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.